Plastic Card Printing
1. Barcode:
Make sure it's on a light background. If it's a black plastic card, draw a white square before inserting the barcode. Otherwise the scanner will not be able to read it. For the barcode type, C39 is the most popular. In addition, for the location of the barcode, you must check plastic card printing with the customer what type of scanner you are using.Some scanners can bring the barcode closer to the edge. If you have to change the barcode size, please do it proportionately.
2. Magnetic stripe:
There are 2 types of magnetic stripe: High-CO for bank cards, credit card usage, high anti-magnetic. Low CO is the most popular and cheaper than High-co. If plastic magnetic cards are not used for banks, use Low CO.
3. Drill holes / strips:
The most popular size for holes is 5 mm. Do not get too close to the edge of the plastic card. For punching for the lanyard, make sure the size is suitable for the lanyard, as the lanyard is thin and thick.
4. Signature bar:
There are 2 types, transparent and white. Not very different Pay attention to the height, if shot more than a person will not be able to write down.
5. Flat number sequencing:
Usually used for membership card numbers. There are 2 types: spray, printing and thermal printing. Spray printing is a number that is formed from a small point. Thermal printing plastic card printers australia is normal. Pay attention to the background for flat numbering. It shouldn't be too dark because these numbers can only be black. Black numbers will not be read on dark backgrounds. Numbering may be a term used for ID cards.
6. Embossing:
Can do easily with the embossing machine And the color can be gold, silver and black Depends on the design of the card Embossing can be capital letters and numbers. Do not exceed 21 digits in 1 line and characters with too many embossing cards are bent. In addition, embossing will affect the text printed on the back. It will make them unreadable.
1. Barcode:
Make sure it's on a light background. If it's a black plastic card, draw a white square before inserting the barcode. Otherwise the scanner will not be able to read it. For the barcode type, C39 is the most popular. In addition, for the location of the barcode, you must check plastic card printing with the customer what type of scanner you are using.Some scanners can bring the barcode closer to the edge. If you have to change the barcode size, please do it proportionately.
2. Magnetic stripe:
There are 2 types of magnetic stripe: High-CO for bank cards, credit card usage, high anti-magnetic. Low CO is the most popular and cheaper than High-co. If plastic magnetic cards are not used for banks, use Low CO.
3. Drill holes / strips:
The most popular size for holes is 5 mm. Do not get too close to the edge of the plastic card. For punching for the lanyard, make sure the size is suitable for the lanyard, as the lanyard is thin and thick.
4. Signature bar:
There are 2 types, transparent and white. Not very different Pay attention to the height, if shot more than a person will not be able to write down.
5. Flat number sequencing:
Usually used for membership card numbers. There are 2 types: spray, printing and thermal printing. Spray printing is a number that is formed from a small point. Thermal printing plastic card printers australia is normal. Pay attention to the background for flat numbering. It shouldn't be too dark because these numbers can only be black. Black numbers will not be read on dark backgrounds. Numbering may be a term used for ID cards.
6. Embossing:
Can do easily with the embossing machine And the color can be gold, silver and black Depends on the design of the card Embossing can be capital letters and numbers. Do not exceed 21 digits in 1 line and characters with too many embossing cards are bent. In addition, embossing will affect the text printed on the back. It will make them unreadable.